После обновления быстро садится батарея. Как исправить

Быстро садится аккумулятор на Андроид после обновления. Как это можно исправить.

МТС 

МТС Smart Turbo fix battery drain after an update Android

samsung battery drain while idle 0 Комментариев , ,

. What to do, if after the MTS update, Smart Turbo began to sit down and started having problems with the battery? I can recommend the following:

  1. Flashing to the latest version Android 9 Pie / 10Q / 11 / 12/ 13 / 14. The tenth version is a little crude, but we update the files as soon as any corrections appear.
    1. Download the firmware Android 14 New
    2. Download the firmware Android 13
    3. Download the firmware Android 12
    4. Download the firmware Android 11
    5. Download link Android 10 Q
    6. Android Download Link 9.0 Pie
  2. Installing factory firmware, download here.
  3. Setting an alternative Cyanogenmod

Below you can see the MTS Smart Turbo firmware manual, unfortunately, this is the only normal solution to the battery problem, the backup option is to go and buy a new smartphone and it is advisable to turn off automatic updates of the operating system on it.

Because of what, Android quickly discharges after updating

The options are as follows:

  1. The firmware developers made a mistake somewhere and now your battery runs out quickly and they do not officially acknowledge their error.
  2. This know-how is planned by the developers or marketers of the company as "planned obsolescence" so you quickly change your smartphone to a new one.

Instructions on how to flash MTS Smart Turbo

After downloading the firmware you need above, proceed to the step-by-step plan! We will flash through ZYKUFlasher — universal (unlike Odin, SP Flash tool, Sam Firm and others) program on a PC for flashing tablets and smartphones on Android devices with a large database of supported models. The instruction for the program was taken from the official site.

  • We connect the device to the computer through the original wire (you can take not the original, but good and high-quality).
  • Download ZYKUFlasher on PC and see the instructions for use
  • In the field Scatter loading file, select the file from the folder with the firmware ending in emmc.txt
  • The remaining fields and buttons are left unchanged.
  • Push Start flash
  • We are waiting for the progress of the bar to reach the end, you should see a message Congratulations! The work is done!
  • Reboot your mobile device
If you get errors, try rebooting and try again, but on a different firmware. If you want root access, we recommend that you look at this one software.

Добавить комментарий